After completing the rim I then used the platform as a template to cut the rim to the correct size. Because the platform was a bit larger than the router table it had a tendency to wiggle out toward the edges. If this were fine furniture I would have to be a little more careful but the epoxy will fill any imperfections.

After making the template cut, I marked a line on the inside about ½ inch from the outer edge of the rim and cut it with a jigsaw. I took my time on this part. One slip and wham! I would cut right through the wood and really lose some strength. The rim turned out really nice. I'm almost ready to glue it to the platform.

However, there needs to be a lip added to the top that allows the user to feel the edge of the platform with their feet while wearing flats boots, tennis shoes, flip flops or something similar to Crocks. I’m still working on how to go about manufacturing this part and having it look aesthetically pleasing. The platform will still need to drain so the lip will not be continuous all the way around. I’m indecisive on the height. We will see how it turns out. I'll ask the guys over at the forum.